Bases, Piers, Extensions and Abutments
Squared Base
This base has two beveled and two squared corners.
Beveled Base
Same size as above except this base has four beveled corners.
Shown with 1/24 scale truck and figure.
Tall Base
This base has square and beveled corners with an epoxied base
giving it one more inch in height and ¼" more in width
and length.These piers are now cast in a single color. They are available though the bridge is not.
Short Pier
These fit the 7" wide Cocker Bridge
Long Pier
Short/Tall close-up
This pier fits the 12" wide Cocker Bridge and is available with or without the center support
This pier fits the 12" wide Cocker Bridge and is available with or without the center support
Debris Guard
A debris guard is a nice
detail for piers or docks.
Long/Tall Pier
Only available with the center support.
Height Extensions
Extensions allow you to build your bridge to suit your terrain.
Let me know if you have custom needs.
New Release!
These abutments and center support are cast in one piece and offered individually. They are 5 ¼" high and available in standard or soot finish.
These are used in the 'Timber Crossing'
These abutments and center support are cast in one piece and offered individually. They are 5 ¼" high and available in standard or soot finish.
These are used in the 'Timber Crossing'
Soot finish
Use these to build elevated curves. Load platform is 2 7/8" x 7/8".
Use these to build elevated curves. Load platform is 2 7/8" x 7/8".
Timber supports top view
