Post and Wall Components
Wall sections are 12 ½" long by 4 3/8" tall and nestle into the posts.
Posts are 2" square and 5¼" high. Posts are available as
corners, straight or left and right entry. Entry posts have a
flat plaque area. The gate is one cast piece and attaches to the posts
with dowels. The gate is detailed and finished on both sides.
The pic to the left is an accurate example of the colors of the
components. Slight variations can occur with temperature/ humidity.
The other pics make the capstones appear brighter than they are
and the ball tops on the entry post are by special request.
View all G scale castings
Wall sections are 12 ½" long by 4 3/8" tall and nestle into the posts.
Posts are 2" square and 5¼" high. Posts are available as
corners, straight or left and right entry. Entry posts have a
flat plaque area. The gate is one cast piece and attaches to the posts
with dowels. The gate is detailed and finished on both sides.
The pic to the left is an accurate example of the colors of the
components. Slight variations can occur with temperature/ humidity.
The other pics make the capstones appear brighter than they are
and the ball tops on the entry post are by special request.
View all G scale castings
Figure is 1:20 scale.
Add your own labels to the entry plaques.
Wall section with door and window is sized to be equal to the gate length
so you can create a squared enclosure.
Wall section is 8¼" x 4 3/8". Door is 3" high.
Front face.
Shown with 1:24 Cat loader and Corvette.
Gate backside detail. 8" x 4½" x ¼" thick
Wall nests in pocket in posts.
Here are samples of the variety of finishes on the gates. Samples F and H are the same green but H is a diluted wash. The others are
the same brown with different techniques and variations on rub and antique wash.
